China supplier Double Acting Spring Loaded Pneumatic Hydraulic Cylinder vacuum pump diy

Product Description

Product Description

CW-A-10T Overall Dimension
Total Stroke Power Stroke L L1 L2
50 5 305 480 393
100 5 355 580 443
150 5 405 680 493
200 5 455 780 543
         
50 10 305 480 457
100 10 355 580 507
150 10 405 680 557
200 10 455 780 607
         
50 15 305 480 521
100 15 355 580 571
150 15 405 680 621
200 15 455 780 671
         
50 20 305 530 635
100 20 355 580 635
150 20 405 680 685
200 20 455 780 735

Specification

Action type Double action
Action pressure Clean compressed air of 3-7kg/cm²
Action-wear hydraulicoil Anti-wear hydraulic oil of VG 68#
Operation temperature 0-55ºC
Operating speed 10-400mm/s
Anti-pressure of oil tank 300kg/cm²
Anti-pressure of pneumatic cylinder 12kg/cm²
Prepress stroke tolerance +1.00mm 0.00mm
Power stroke tolerance +0.20mm 0.00mm
Operation frequency 10-50 times (related to the specific pre-pressure and booster stroke)
High pressure Boosting force 1-80T(the actual output tonnage according to the customer demand)

Product Features

 Working Principle

   pneumatic cylinder is combined the oil pressure cylinder and booster together for taking pure gas press as the power source. It makes use of the different size of booster, the crosssection area compression ratio and Pascal energy conservation principle. Because of constant pressure, when the compression area change from small to large, the press would vary with the size, so as to raise the gas pressure to tens. Taking the prepress standard hydro pneumatic cylinder as an example: When the work gas pressed on the hydraulic oil (or working piston) surface, hydraulic oil would flow to the approach stroke cavity because of the air pressure, then the hydraulic oil would promote the workpiece to move rapidly. When the workpiece is meet the resistance larger than the gas pressure, it stops moving. At this point, the booster cavity start moving because of the signal (or pneumatic signal), then achieve the purpose of moding products!

Features:

  1.Fast speed: The action speed is faster than the hydraulic drive and it is more stability than pneumatic drive;
  2.High output: It can reach the highest output of oil hydraulic machine under same conditions, which can not be achieved by the pure pneumatic           machine;
  3.Low price: The price is lower than the oil pressure system;
  4.Easy to maintain: The simple structure is easier to maintain than the oil pressure system;
  5.Low energy consumption: When continue to boost or stop moving, it does not need the motor to keep working as the hydraulic system,
    then the energy can be saved. And it is convenient to take the power source, so the actual energy     
    consumption is equivalent to 10%-30% of hydraulic power system;
  6.No leakage: Energy conversion is easy with zero leakage, so not worry about the environmental pollution;
  7.No harm to the die: In order to meet the technology needs, stamping pressure and the work stroke can keep within the provided area without             adjustable levels;
  8.Soft landing: Soft-stamping technology reduce the noise to protect the die;
  9.Fault less: No temperature rising problems unlike the hydraulic system;
10.Small space: Space area can be less than 50% compare with normal air cylinder and hydraulic station;
 

Factory Display

Packaging

 

Company Introduction

      CHINAMFG Machinery Equipment Co.,Ltd supply a wide range of high quality punching machine, hydraulic press machine, automatic riveting machine,eyelet punching machine, hydro pneumatic press machine,air liquid booster pump, pneumatic hydraulic components and other automation equipment. Committed to the complete solution from design to manufacturing to meet customer demand.
      Our company has a professional technical team, nearly 30 years of experience in this area. Our products are widely used in aerospace, new energy, automobile and boating, petrochemical, mold, clothing and other fields.Our products are exported to Europe, South America, North America, southeast Asia, South Africa and other places.
      CHINAMFG has always adhered to the principle of “Integrity, Professionalism, Technology and Innovation”,to provide high quality solutions to the customers and all aspects of service, strive to make the world love made in China.Corporate Philosophy: Integrity as Root, Customer-Based Culture; Science and Technology Innovation. Sharina and Co-Win.

Certifications

Professional technical team, nearly 30 years of industry experience;

Lean production management mode combines market demand, product research and development, production and manufacturing.pre-sales quality and after-sales service; 

Advanced equipment, mature technology, with a number of independent intellectual vproperty rights;

Complete quality control, assured quality, from raw material procurement,production process control, to finished product inspection, packaging, full field monitoring traceability, to ensure that every product qualified;

Has 3 specialized processing and manufacturing factories, sufficient inventory, short delivery time;

Support customized, design according to customer requirements to meet the diversified demand of customers;

Perfect after-sales service system and after-sales quality tracking system;

Professional sales system, rich experience in export related operation process.
 

Material: Steel
Usage: Automation and Control
Structure: Piston Cylinder
Power: Pneumatic
Standard: Nonstandard
Pressure Direction: Double-acting Cylinder
Customization:
Available

|

double acting hydraulic cylinder

How does a double-acting hydraulic cylinder contribute to controlled and precise movement?

A double-acting hydraulic cylinder plays a crucial role in achieving controlled and precise movement in hydraulic systems. Here’s a detailed explanation:

1. Bi-Directional Operation: Double-acting hydraulic cylinders are designed to generate force in both directions. By supplying pressurized hydraulic fluid to the cap end of the cylinder, the piston extends and produces force. Conversely, supplying fluid to the rod end retracts the piston. This bi-directional operation allows for precise control over the movement of loads in both directions, enabling controlled and precise positioning.

2. Adjustable Force Output: The force output of a double-acting hydraulic cylinder can be adjusted by controlling the hydraulic pressure applied to the cylinder. By regulating the pressure in the hydraulic system, the force generated by the cylinder can be varied to match the specific load requirements. This adjustability allows for precise control over the force exerted by the cylinder, contributing to controlled and precise movement.

3. Flow Control: Double-acting hydraulic cylinders can incorporate flow control valves or throttle valves in the hydraulic circuit. These valves regulate the flow rate of hydraulic fluid entering or exiting the cylinder, controlling the speed of movement. By adjusting the flow rate, the movement of the cylinder can be slowed down or sped up, allowing for precise control over the speed of operation. This flow control capability enhances the controlled and precise movement of the cylinder.

4. Position Feedback Devices: To achieve precise movement, double-acting hydraulic cylinders can be equipped with position feedback devices, such as linear transducers or potentiometers. These devices provide real-time information about the position of the cylinder’s piston. The position feedback data can be used to accurately control the movement and position of the load, ensuring precise positioning and movement control.

5. Proportional Control: Double-acting hydraulic cylinders can be integrated into proportional control systems. Proportional control utilizes electronic or electro-hydraulic systems to proportionally regulate the hydraulic pressure and flow, allowing for fine control over the cylinder’s movement. This precise control mechanism enables accurate and controlled movement, making it suitable for applications that require precise positioning or synchronization of multiple cylinders.

6. System Stability: Double-acting hydraulic cylinders contribute to controlled and precise movement by providing system stability. The hydraulic fluid acts as an incompressible medium, transmitting force from the cylinder to the load without significant loss or deformation. This stability ensures that the movement of the cylinder is consistent and predictable, allowing for precise control over the load’s position.

7. Mechanical Advantage: Double-acting hydraulic cylinders leverage mechanical advantage to enhance controlled and precise movement. The design of the cylinder incorporates a larger surface area on the cap end of the piston compared to the rod end. This size difference creates a force amplification effect, enabling the cylinder to exert greater force during the extension stroke. This mechanical advantage allows for finer control over the movement and positioning of the load.

By combining bi-directional operation, adjustable force output, flow control, position feedback devices, proportional control, system stability, and mechanical advantage, double-acting hydraulic cylinders contribute to controlled and precise movement in a wide range of applications.

double acting hydraulic cylinder

Can double-acting hydraulic cylinders be applied in mining equipment for material transport?

Yes, double-acting hydraulic cylinders are widely used in mining equipment for material transport. Here’s a detailed explanation:

1. Dump Trucks: Dump trucks are commonly used in mining operations for transporting large quantities of material, such as rocks, ores, and coal. Double-acting hydraulic cylinders are employed in the tipping mechanism of dump trucks. These cylinders provide the necessary force to raise the truck bed, allowing the material to be unloaded at the desired location. The bidirectional force generation of double-acting cylinders enables controlled and efficient tipping of the truck bed, facilitating the rapid and effective transport of materials.

2. Front Shovels and Excavators: Front shovels and excavators are heavy-duty machines used in mining for digging and loading materials onto trucks or conveyor systems. Double-acting hydraulic cylinders are utilized in the boom and bucket mechanisms of these machines. The cylinders provide the force required to extend and retract the boom, as well as to control the bucket’s opening and closing. This allows operators to manipulate the excavator effectively, scoop up materials, and deposit them into transport vehicles or processing equipment.

3. Conveyor Systems: Conveyor systems are extensively used in mining operations to transport bulk materials over long distances. Double-acting hydraulic cylinders are employed in conveyor belt tensioning systems. These cylinders apply force to adjust the tension of the conveyor belt, ensuring proper alignment and preventing slippage. The precise force control offered by double-acting cylinders allows for accurate tension adjustment, optimizing the efficiency and reliability of material transport on the conveyor system.

4. Haulage Systems: Haulage systems, such as underground mine trucks and railcars, are crucial for transporting materials within mining operations. Double-acting hydraulic cylinders are employed in these systems for various functions. For instance, the cylinders can be used to control the opening and closing of doors or gates on mine trucks or railcars, facilitating the loading and unloading of materials. Additionally, hydraulic cylinders can be utilized in braking systems to provide the necessary force for safe and controlled stopping of the haulage vehicles.

5. Lifting and Positioning Equipment: In mining operations, lifting and positioning equipment, such as cranes and hoists, are employed to handle heavy materials and equipment. Double-acting hydraulic cylinders play a vital role in these machines. The cylinders provide the force necessary for lifting, lowering, and positioning loads with precision. Whether it’s lifting large mining equipment or positioning heavy materials, hydraulic cylinders ensure safe and controlled movement, enhancing the efficiency of material transport in mining operations.

Given their applications in dump trucks, front shovels and excavators, conveyor systems, haulage systems, as well as lifting and positioning equipment, double-acting hydraulic cylinders are widely applied in mining equipment for material transport. Their ability to generate precise and controllable forces makes them essential components in ensuring efficient and reliable material handling in the mining industry.

double acting hydraulic cylinder

Can double-acting hydraulic cylinders be used for both pushing and pulling applications?

Yes, double-acting hydraulic cylinders can be used for both pushing and pulling applications. Here’s a detailed explanation:

1. Bidirectional Force: Double-acting hydraulic cylinders are designed to generate force in both the extension and retraction strokes. When hydraulic fluid is applied to the cylinder’s cap end, it pushes the piston, creating a pushing force. Conversely, when hydraulic fluid is applied to the rod end, it pulls the piston, generating a pulling force. This bidirectional force capability allows the cylinder to be used for both pushing and pulling applications.

2. Controlled Linear Motion: Double-acting cylinders provide precise control over the linear motion of the piston. By controlling the flow and pressure of hydraulic fluid, the operator can regulate the speed, force, and direction of the cylinder’s movement. This control enables the cylinder to perform pushing and pulling tasks with accuracy and control.

3. Versatility in Applications: The ability of double-acting hydraulic cylinders to push and pull makes them highly versatile in a wide range of applications. They can be used in various industries and sectors where controlled linear force is required. Some common applications include lifting, pushing, pulling, clamping, bending, and holding tasks. For example, in manufacturing, double-acting cylinders are used in presses, assembly lines, and robotics. In construction, they are employed in equipment like excavators and loaders for lifting and moving heavy loads.

4. Efficient Energy Utilization: Double-acting cylinders are known for their efficient energy utilization. When the cylinder is extending or retracting, the opposite side of the piston can act as a reservoir, storing the hydraulic fluid. This stored energy can be utilized in the opposite stroke, resulting in improved efficiency. This feature is particularly advantageous in applications where energy conservation is important.

5. Control and Safety Measures: When using double-acting hydraulic cylinders for both pushing and pulling applications, proper control and safety measures should be implemented. This includes using appropriate control valves, pressure relief valves, and safety devices to regulate the hydraulic pressure, prevent overloading, and ensure safe operation.

In summary, double-acting hydraulic cylinders can be used for both pushing and pulling applications. Their bidirectional force capability, controlled linear motion, versatility, efficient energy utilization, and the implementation of proper control and safety measures make them suitable for a wide range of tasks that require both pushing and pulling forces.

China supplier Double Acting Spring Loaded Pneumatic Hydraulic Cylinder   vacuum pump diyChina supplier Double Acting Spring Loaded Pneumatic Hydraulic Cylinder   vacuum pump diy
editor by CX 2023-12-08

Leave a Reply

Your email address will not be published. Required fields are marked *